Dernière nouveauté | Omron, France

Connexion

Please use more than 6 characters. Forgot your password? Click here to reset.

Modifier mot de passe

Nous rencontrons des problèmes techniques. Votre demande ne peut être traitée. Veuillez nous excuser et ré-essayer plus tard. Détails :

Download

Inscription

Nous rencontrons des problèmes techniques. Votre demande ne peut être traitée. Veuillez nous excuser et ré-essayer plus tard. Détails :

Download

Merci pour votre inscription à Omron

Un e-mail qui vous permettra de terminer la création de votre compte a été envoyé à

Revenir au site Web

obtenir un accès direct

Veuillez remplir le formulaire ci-dessous pour accéder directement au contenu de cette page.

Text error notification

Text error notification

Politique de confidentialité">

Checkbox error notification

Checkbox error notification

Nous rencontrons des problèmes techniques. Votre demande ne peut être traitée. Veuillez nous excuser et ré-essayer plus tard. Détails :

Download

Nous vous remercions de votre intérêt.

Vous avez désormais accès à Dernière nouveauté

Un email de confirmation a été envoyé à

Continuer vers la page

Veuillez vous ou obtenir un accès direct pour télécharger ce document.

Dernière nouveauté

produit
Component Focus: Omron Wireless Buttons
  • Component Focus: Omron Wireless Buttons

    Component Focus: Omron Wireless Buttons

    I'm Josh Bishop for OnlineCcomponents.com and before me I have an entire self-contained wireless communications package from Omron. With a minimum of three components and no external interfaces required Omron has made wireless communication in an industrial setting incredibly easy. First we have the S8VK 24 volt DC power supply; in this din rail-mounted power supply is very slim as you can see and has vents at the bottom and top for silent convection cooling. It takes a wide voltage input from 100 to 240 volts AC and accepts either 50 or 60 Hertz. You can connect the incoming power here at the bottom with line, neutral and ground inputs. This particular power supply outputs the 24 volt DC power at the top with these terminal blocks and can provide up to 15 watts which is ample power for this wireless receiver or many other devices. There are other S8V caged power supplies that can output more power, but this works great in this case. The S8VK is providing power to this wireless receiver the A2W-RPC- WC1. This receiver is very straightforward to use with clearly marked ports and switches and common sense usage. This has eight outputs and accordingly can be synced with eight wireless buttons. You can see the power input up at the top and the outputs here at the bottom. There are lights for power, any potential errors and receipt of signals right here. There's also a slide switch for usage testing and setup. You'll note that this is 922.5 megahertz which gives it a greater range and better signal propagation than higher frequency signals. We end up with the communication assistance of about 100 meters without any obstructions. Finally we have the two push-button switches. They're obviously both wireless and they generate their own power so no battery is required. This also eliminates the need for maintenance. A light comes on when you click the button showing that it has been actuated and is working. They come with the space to allow you to easily mount them and swap them around as you need. The buttons are functionally the same, but you have the option of different types of plungers depending on what works best in your situation. They're both ULl certified, rated up to 1 million operations and are IP65 sealed. They're also shock and vibration resistant making them ideal for tough industrial application. All of this is connected and powered up. It is not set up and I'll walk you through the process just to show you how easy it is for you. You'll need to connect the S8VK to power. Again it can use power from practically anywhere in the world. Then hook the output of the power supply to the input of the wireless receiver and now everything will turn on and you'll be up to the point where I am currently. Programming the buttons and the receiver doesn't require anything external like a computer, you simply set the rotary switch to the channel you want to use, move the slide switch to ID and then click the button you want to use, 3 times relatively quickly. You'll see the receive light come on indicating that the receiver got the message and it has been paired. Switch to another channel do the same thing with the other button. That's it! It's recommended to make certain other systems in the area are not in use during this procedure, however, as it may cause problems. Let's move the slider switch to run and start clicking these buttons and watch those different indicators light up. Now deleting the buttons and reassigning them is just as easy; put the rotary switched to delete and click the button three times until the light comes on. The button is now unassigned and can be programmed to another output slot. With just a few components in a couple minutes of setup you can easily integrate Omron's wireless buttons into your systems. if you want to learn more or purchase these Omron components go to OnlineComponents.com Features: - 8 pushbuttons can be assigned to one receiver unit - Each receiver has 8 transistor outputs (one-shot operation) - A pushbutton can be assigned to multiple outputs of a receiver - Wireless communication is confirmed with a colored LED indicator on the pushbuttons - 922.5MHz frequency band reduces interference, providing a better signal in locations with obstacles - A high-sensitivity magnetic-base antenna is an option when installing the receiver inside a control panel

    04:08

Onlinecomponents.com présente les boutons sans fil d'Omron

2 septembre 2019 Onlinecomponents.com présente les boutons sans fil d'Omron. Le site explique comment nous avons rendu la communication sans fil extrêmement simple dans les environnements industriels.
EN SAVOIR PLUS
institutionnel
The visit of the chancellor of Germany, Angela Merkel at Omron at Hannover Messe
  • The visit of the chancellor of Germany, Angela Merkel at Omron at Hannover Messe

    The visit of the chancellor of Germany, Angela Merkel at Omron at Hannover Messe

    The Omron team was honoured to welcome the Chancellor of Germany, Angela Merkel, together with Stefan Löfven, the Prime Minister of Sweden, at our booth at Hannover Messe yesterday! ------- We demonstrated how #artificialintelligence, smart robotics, as well as advanced sensor and control technologies can change manufacturing, where humans and machines work in close cooperation to complement each other. ------ Linkedin post: https://www.linkedin.com/feed/update/urn:li:activity:6518737813851119616 SUBSCRIBE to our channel for more!

    00:51

Foire de Hanovre : la chancelière Merkel impressionnée par l'interaction harmonieuse entre l'homme et la machine

4 avril 2019 La chancelière allemande et le Premier ministre suédois rencontrent Forpheus, le robot joueur de tennis de table, doté des dernières technologies de détection et de contrôle.
EN SAVOIR PLUS
produit
Component Focus: Omron Wireless Buttons
  • Component Focus: Omron Wireless Buttons

    Component Focus: Omron Wireless Buttons

    I'm Josh Bishop for OnlineCcomponents.com and before me I have an entire self-contained wireless communications package from Omron. With a minimum of three components and no external interfaces required Omron has made wireless communication in an industrial setting incredibly easy. First we have the S8VK 24 volt DC power supply; in this din rail-mounted power supply is very slim as you can see and has vents at the bottom and top for silent convection cooling. It takes a wide voltage input from 100 to 240 volts AC and accepts either 50 or 60 Hertz. You can connect the incoming power here at the bottom with line, neutral and ground inputs. This particular power supply outputs the 24 volt DC power at the top with these terminal blocks and can provide up to 15 watts which is ample power for this wireless receiver or many other devices. There are other S8V caged power supplies that can output more power, but this works great in this case. The S8VK is providing power to this wireless receiver the A2W-RPC- WC1. This receiver is very straightforward to use with clearly marked ports and switches and common sense usage. This has eight outputs and accordingly can be synced with eight wireless buttons. You can see the power input up at the top and the outputs here at the bottom. There are lights for power, any potential errors and receipt of signals right here. There's also a slide switch for usage testing and setup. You'll note that this is 922.5 megahertz which gives it a greater range and better signal propagation than higher frequency signals. We end up with the communication assistance of about 100 meters without any obstructions. Finally we have the two push-button switches. They're obviously both wireless and they generate their own power so no battery is required. This also eliminates the need for maintenance. A light comes on when you click the button showing that it has been actuated and is working. They come with the space to allow you to easily mount them and swap them around as you need. The buttons are functionally the same, but you have the option of different types of plungers depending on what works best in your situation. They're both ULl certified, rated up to 1 million operations and are IP65 sealed. They're also shock and vibration resistant making them ideal for tough industrial application. All of this is connected and powered up. It is not set up and I'll walk you through the process just to show you how easy it is for you. You'll need to connect the S8VK to power. Again it can use power from practically anywhere in the world. Then hook the output of the power supply to the input of the wireless receiver and now everything will turn on and you'll be up to the point where I am currently. Programming the buttons and the receiver doesn't require anything external like a computer, you simply set the rotary switch to the channel you want to use, move the slide switch to ID and then click the button you want to use, 3 times relatively quickly. You'll see the receive light come on indicating that the receiver got the message and it has been paired. Switch to another channel do the same thing with the other button. That's it! It's recommended to make certain other systems in the area are not in use during this procedure, however, as it may cause problems. Let's move the slider switch to run and start clicking these buttons and watch those different indicators light up. Now deleting the buttons and reassigning them is just as easy; put the rotary switched to delete and click the button three times until the light comes on. The button is now unassigned and can be programmed to another output slot. With just a few components in a couple minutes of setup you can easily integrate Omron's wireless buttons into your systems. if you want to learn more or purchase these Omron components go to OnlineComponents.com Features: - 8 pushbuttons can be assigned to one receiver unit - Each receiver has 8 transistor outputs (one-shot operation) - A pushbutton can be assigned to multiple outputs of a receiver - Wireless communication is confirmed with a colored LED indicator on the pushbuttons - 922.5MHz frequency band reduces interference, providing a better signal in locations with obstacles - A high-sensitivity magnetic-base antenna is an option when installing the receiver inside a control panel

    04:08

Onlinecomponents.com présente les boutons sans fil d'Omron

2 septembre 2019 Onlinecomponents.com présente les boutons sans fil d'Omron. Le site explique comment nous avons rendu la communication sans fil extrêmement simple dans les environnements industriels.
EN SAVOIR PLUS
produit
Omron NX-Series Safety Network Controller
  • Omron NX-Series Safety Network Controller

    Omron NX-Series Safety Network Controller

    NX Series CIP Safety Controller with EtherCAT and Ethernet/IP capabilities. In addition to new hardware, Sysmac Studio new functions include Automatic Programming, Safety Data Logging, and Online Functional Test. For more information visit: USA https://industrial.omron.us/en/products/nx-sl5 Canada https://industrial.omron.ca/en/products/nx-sl5 Mexico https://industrial.omron.mx/es/products/nx-sl5

    03:22

Nouvelle série NX de contrôleurs de réseau de sécurité

21 janvier 2019 Les premiers contrôleurs de sécurité avancée au monde à prendre en charge deux réseaux de sécurité industrielle pour les systèmes robotiques industriels
EN SAVOIR PLUS
produit
fhv7 module fcard prod

Une flexibilité ultime pour s'adapter à une scène de production en constante évolution

12 novembre 2018 OMRON a annoncé la sortie mondiale de sa nouvelle caméra intelligente FHV7 dotée de fonctions d'éclairage et de traitement d'images pour les inspections visuelles avancées. Grâce au premier système d'éclairage multicolore au monde*1 et à une caméra haute résolution 12 mégapixels d'exception*2, une seule caméra intelligente FHV7 suffit pour respecter les normes de précision les plus strictes lors des inspections visuelles sur les chaînes de production à capacité élevée.
EN SAVOIR PLUS
institutionnel
The visit of the chancellor of Germany, Angela Merkel at Omron at Hannover Messe
  • The visit of the chancellor of Germany, Angela Merkel at Omron at Hannover Messe

    The visit of the chancellor of Germany, Angela Merkel at Omron at Hannover Messe

    The Omron team was honoured to welcome the Chancellor of Germany, Angela Merkel, together with Stefan Löfven, the Prime Minister of Sweden, at our booth at Hannover Messe yesterday! ------- We demonstrated how #artificialintelligence, smart robotics, as well as advanced sensor and control technologies can change manufacturing, where humans and machines work in close cooperation to complement each other. ------ Linkedin post: https://www.linkedin.com/feed/update/urn:li:activity:6518737813851119616 SUBSCRIBE to our channel for more!

    00:51

Foire de Hanovre : la chancelière Merkel impressionnée par l'interaction harmonieuse entre l'homme et la machine

4 avril 2019 La chancelière allemande et le Premier ministre suédois rencontrent Forpheus, le robot joueur de tennis de table, doté des dernières technologies de détection et de contrôle.
EN SAVOIR PLUS
institutionnel
innovation-lab-stuttgart fcard event

Omron propose la « validation technique » à ses clients avec huit laboratoires d'innovation

19 octobre 2018 Nous avons le plaisir de vous annoncer l'ouverture de huit nouveaux laboratoires d'innovation en Europe. Ces laboratoires permettent aux fabricants de profiter des avantages d'une usine connectée, automatisée, intelligente et optimisée grâce aux dernières technologies d'automatisation et de robotique, en complément de tests de validation technique pour de nouveaux environnements.
EN SAVOIR PLUS
institutionnel
ŠKODA AUTO uses Omron's fully autonomous LD mobile robot at Vrchlabí plant

ŠKODA AUTO utilise le robot mobile d'Omron dans son usine de Vrchlabí

27 septembre 2018 Le robot autonome contribue à l'amélioration continue de la sécurité au travail dans l'usine de Vrchlabí et permet de minimiser les risques. Il distingue les personnes se trouvant sur sa trajectoire, ainsi que les véhicules et les obstacles fixes.
EN SAVOIR PLUS

eNews expliqué

Abonnez-vous dès aujourd'hui à eNews d'Omron et vous recevrez la dernière copie de notre courrier d'informations, eNews.

En savoir plus